Itrademarket SMSListed Since 2008
UPS, BATTERY, PEMBANGKIT LISTRIK TENAGA MATAHARI, SURYA ( www.sentradaya.com)
http://sclsby.itrademarket.com
http://sclsby.itrademarket.com
Itrademarket SMS
Average User Review
There is no review for this company
Language:  English  Indonesia |
| RIELLO Ups: Single phase/ Single phase PLUG DIALOG | |||||||||||||||
|
ELECTROLYTE FILLING -
The battery design and construction negates the need for electrolyte addition and the battery remains maintenance free throughout its design life. Gelled electrolyte is introduced to the cell by means of custom-built vacuum filling machines; vacuum cycling is utilized after the filling process. CHARGING CHARACTERISTICS Solar installations can occasionally have limitations on their ability to charge batteries due to unfavourable weather conditions, for this reason charging voltages should optimise the charge time available and higher currents are ideal to “ RAPID” charge the battery. The charging current may vary from 0.01 to 5 times I10 but the charging voltage should be restricted to 2.3 to 2.4 VPC. Daily discharge below 0.2 C100 - 2.30-2.35 VPC Daily discharge above 0.2 C100 - 2.35-2.40 VPC ( Based on 20 0C) If the monthly average temperature is below 10 oC the charging voltage should be increased by 0.03V per oC. Each battery technology has its advantages and disadvantages, it is therefore important to choose the right battery for the application. For SOLAR applications GEL technology is without doubt the right choice, the price premium is easily off-set by the life and cycle expectations for this demanding application subjected to high and low temperatures, unpredictable charging, daily cycling, probable partial state of charge discharges. Advantages of Gel Batteries: ! Full recovery from deep discharge, even when the battery is not recharged immediately. ! Ideal for repeat cycling daily use. ! Excellent performance over long discharges ! Good tolerance to higher temperature applications ! Improved resistance to freezing ! Suitable where mains power is unstable ! Zero stratification due to immobilized electrolyte ! No equalization charge necessary ! Reduced self-discharge ! Limiting design protects the positive plates to greatly improve cycle life ! Thicker plates for reduced grid corrosion and increased cycle life ! Improved charge acceptance due to low internal resistance ! High resistance to water loss with the right charging set up ! Ultra stable polymer separator with glass mat for increased performance ! High resistance to shorting due to superior mechanical strength of the polymer separator ! Increased tolerance to poor charging parameters ! Can be discharged even when full recharge has not been achieved, without loss of battery capacity Advantages of AGM Batteries: ! Lower initial cost when compared to equivalent power Gel ! Ideal for starting and stationary applications ! Superior performance for shorter duration / higher current discharges ! Smaller size battery can be used for higher rate discharges. RECYCLE LEAD RETURN RUBBISH BIN Pb R
| |||||||||||||||
)